Let's check about my Linky electric counter doesn't output anything on the "teleinfo" port.
I should have 13Vrms for supply output let's check that first
Documentation in french below
https://lucidar.me/fr/home-automation/linky-customer-tele-information/
Let's restart Home
Ok so it's weird, maybe I'm doing something wrong, I have 0.1Vac on the tele-info output of the counter, where I should have something like 5Vac. I check on the neighbor counter and same measure but it's the same counter with the same configuration.
And I can't restart the counter because there is no circuit breaker before it.
I will call my supplier tomorrow to check if the teleinfo is enabled because, I'm pretty sure it's not the case.
@dashie C'est du DIY avec un opto et un raspberrypi mais testé sur mes 2 compteurs précédents et au voltmètre à vide j'ai rien du tout
@dashie Je devrais avoir genre 5Vac entre I1 et I2 et 13Vac entre I1 et A
d'après cette page https://lucidar.me/fr/home-automation/linky-customer-tele-information/
@hugopoi si tu es dans la merde, tu sais où débarquer 😉
So I have 0.3Vrms on the output seems not right at all. Now I need shutdown the counter (my entire home), then check the fuse and reboot the counter itself. I read that some of them need a restart.
I think the fuse is only for C1 and C2 output to handle water heater when you have 2 rates.